這種基于納米技術的創新的纖維保護產品，可以使幾乎任何類型的紡織品具備防水，防塵，防污垢，防污漬的特性（中國進出口網）

用于紡織品和紙的nanoblo®納米涂層不會影響外觀，透氣性，顏色并且易于維護。

另外，該產品戶外防水性能好，液體變干的時間會更長。

如果您使用我們的產品，油漬，咖啡污漬和其他常見頑固污漬將成為歷史。

我們的產品受到世界上最重要的紡織品行業的質量認證機構，德國海恩斯坦研究院的ECO-Passport認證，該認證確認我們的產品對于人體是完全安全的，接觸涂層織物時完全不會傷及人的皮膚。

使用范例：
服裝
家用紡織品（枕頭，家具），地毯
麂皮/真皮
紙，紙板

產品特點：
強疏水性
強不粘性
保護纖維，防止灰塵滲入

其它性能：
透明液體（涂層厚度：100?150 毫微米）
永久（防紫外線，非常耐磨損）
不會改變纖維觸感
透氣
操作簡單（可自己動手）
耐洗滌劑和清洗劑

用法：
該產品操作簡單，同樣適用于終端消費者使用：
1.手動：潤濕織物（通過噴灑或浸泡）
2.工業：使用標準的HVLP系統。

在距離物體表面10cm處噴灑。
此二氧化硅涂層噴灑后24小時固化。易清潔效果只能在硬化后進行測試。
可能已被留在表面上的涂層過程之前污漬將由涂層被截留在表面上。
施加該涂層前，一定要徹底清潔物體表面！

貯存：
未開封原裝容器納米涂層可以儲存至少2年。
建議儲物架和運輸溫度：3℃?30℃

噴涂面積：
手動及工業： 25 - 100 ml/㎡，并且根據基質的吸收性而定。

和其他產品相比，nanoblo®二氧化硅涂層的競爭優勢：
•持久性及其壽命：紫外線穩定性，確保其功效達數年之久，接近于涂覆表面壽命
而其他涂層會在陽光下慢慢損耗
•耐磨及易清潔效應：基質施加納米涂層后，耐磨性能和耐機洗性能良好 - 該涂層會粘附到纖維上，直到它受外部影響被破壞掉。而許多和我們競爭的產品并不具備耐機洗性。
•耐清洗劑：該產品耐清洗劑。而許多和我們競爭的產品并不具備該特點，在清潔后必須重新施加

包裝：
250毫升和500毫升，罐裝，用于商業用途；5升和更大的罐裝納米涂層，用于工業用途。


This innovative fibre protection-product, based on Nano-Technology protects almost any type of textile from water, dirt, contamination and stains.

nanoblo® Textiles & Papers will not affect the appearance, its ability to breath, its colour and is easy to maintain.

Also, is exceedingly water-resistant on outdoor materials, keeping them drier longer.

Oil, coffee and other frequent stains belong to the past, if the material is treated with our protective products.

nanoblo® Textiles & Papers is certified with the ECO-Passport certificate from the Hohenstein institute from Germany, the world’s most important certificate when it comes to textiles that confirms that our product is completely safe for humans and nothing can happen to the human skin when it touches the coated textile.

Examples of use:
Clothing
Household textiles (pillows, furniture), carpets
Suede/leather
Paper, cardboard

Product characteristics:
Strong hydrophobics
Strong non-stick properties
Protection of fibres from the infiltration of dirt

Other properties:
Invisible to the human eye (coating thickness: 100-150 nm)
Permanent (UV-stable, very resistant to abrasion)
No change on haptic of the fibre
Breathable
Simple application (do-it-yourself)
Washing and cleaning agent resistance

Application:
Simple do-it-yourself application makes it suitable for end-customers as well:
1. Manual: Application by wetting textiles (spraying or dipping)
2. Industrial: Application using the standard HVLP systems.


Spray the surface from a 10 cm distance.
This SiO2-coating is completely networked and hardened after 24 hours. The easy-clean effect can only be tested after this hardening period.
Stains that may have been left on the surface before the coating procedure will be trapped on the surface by the coating.
ALWAYS COAT CLEAN SURFACES!!!

Storage stability:
Unopened original containers can be stored for at least 2 years.
Recommended storage- and transport temperature: +3 to 30°C

Consumption:
Manual & Industrial: between 25 and 100 ml/m2, depending on absorbency of the substrate.
An afforded quantity of approx. 10 ml/m2 per mm of material’s thickness should be calculated.

Advantages of nanoblo® SiO2 coatings in comparison with competitive products:
• Permanence and longevity: The UV-stability enables functionality for a number of years, approximately the lifetime of the coated surface
Many competitive products are damaged slowly by sunlight
•Abrasion-resistant easy-to-clean effect: A solid chemical connection with the substrate enables an excellent abrasion and washing machine-resistance – the coating adheres to the fibres until it is destroyed by external influences. Many competitive products are not washing machine resistant.
• Washing agent stability: The product is washing agent-resistant. Many competitive products must be reapplied after cleaning textiles

Packaging:
The product comes in canisters of 250 ml and 500 ml for commercial use and in 5 liter and bigger canisters for industrial use.